For these repair you are going to need:
Procedure:
- First the right side:
Remove the 5 x 10 mm bolts that secure the mount to the frame, the four at the top with a ratchet or an air tool, the other one with a wrench.
- Remove the top 17mm bolt that attaches to the shock. You can hold the shock with one tool and turn it with the wrench or impact gun is easier.
- Take out the mount.
- Clean the area.
- Install the new mount onto the shock.
- Push down and catch the 5 x 10 mm bolts onto the frame.
- Catch the shock 17 mm bolt.
- Tighten the 10mm bolts.
- TIghten the 17mm bolt with a gun or by holding the shock.
- Repeat for the other side, but on the left side you have to loosen the 3 10mm nuts for the power steering reservoir and move aside, then is the same thing.
When it comes to fitness technology, this device sounds like a real winner!I like and understand fully your topic and bookmark it for future post of you. Fredrickson
ReplyDelete